Example scripts for the Analog Shield that use the Arduino-style functions in arduino.py (from arduino import *) with analog_shield.py, in examples/arduino/analog_shield/. Each script has the shape of an Arduino sketch: setup() runs once, then loop() runs over and over. The main() at the end of each file starts them; leave it as it is. The same examples written with phyduino.py are on the phyduino.py examples page.

With analog_shield.py on the board, run a script from PyCharm, or with mpremote run examples/arduino/analog_shield/<name>/main.py. To have it run every time the board starts, copy its main.py to the board: mpremote cp examples/arduino/analog_shield/<name>/main.py :, then press RESET.

Example	What it shows
Blink LEDs	Blinking the green and red LEDs in turn
Encoder Counter	Counting the encoder's clicks; a press sets it back to 0
Encoder LED Brightness	Setting the green LED's brightness with the encoder
Read Pot	The potentiometer's reading on A5
Temperature	The LMT84's temperature through the amplifier
Amplifier Chain	The voltage at each stage of the amplifier