phyduino/analog_shield/encoder_counter/main.py

Prints the rotary encoder's position each time it changes: one count per click, up clockwise and down anticlockwise. Pressing the knob sets it back to 0.

Connect

JP3 (VIO) on 3.3 V.

Uses

encoder(): Encoder.position(), Encoder.set_position(), Encoder.on_press()

# Prints the rotary encoder's position each time it changes: one count per
# click, up clockwise and down anticlockwise. Pressing the knob sets it back
# to 0.
#
# Needs analog_shield.py on the board and JP3 (VIO) on 3.3 V. The encoder is
# read by pin interrupts, so no click is missed while the loop sleeps.
 
import time  # sleep_ms() for pauses
 
import analog_shield as shield  # the Analog Shield library, used as shield.<name>
 
knob = shield.encoder()  # sets up D2-D4 and starts counting from 0
 
 
def reset():  # runs each time the knob is pressed
    knob.set_position(0)
 
 
knob.on_press(reset)
 
last = None  # the position last printed; None so the first one prints
 
while True:  # repeats until stopped: Interrupt in PyCharm, or mpremote soft-reset
    position = knob.position()
    if position != last:  # only print when it has changed
        print(position)
        last = position
    time.sleep_ms(10)  # a short pause; the counting carries on meanwhile